M. Barnes, S. Watson, D. Flynn, S. Djurović (Editors): Technology Drivers in Windfarm Asset Management, doi: https://doi.org/10.17861/20180718
Anees Mohammed, Juan I. Melecio and Siniša Djurović, “Stator Winding Fault Thermal Signature Monitoring and Analysis by in-situ FBG Sensors”, in IEEE Trans. Industrial Electronics, doi: 10.17861/20180718
A. Stetco, F. Dinmohammadi, X. Zhao, V. Robu, D. Flynn, M. Barnes, J. Keane, G. Nenadic, “Machine learning methods for wind turbine condition monitoring: A review”, in Renewable Energy, 2018, vol. 133, pp. 620-635, doi: https://doi.org/10.1016/j.renene.2018.10.047
A. Mohammed, S. Djurović, “A study of distributed embedded thermal monitoring in electric coils based on FBG sensor multiplexing,” Elsevier Microprocessors and Microsystems, Vol. 62, 2018, Pages 102 – 09.
A. Mohammed, S. Djurović, “Stator Winding Internal Thermal Stress Monitoring and Analysis Using in-situ FBG Sensing Technology”, in IEEE Trans. Energy Conversion, 2018, doi: 10.1109/TEC.2018.2826229
A. Mohammed, S. Djurović, “FBG Thermal Sensing Features for Hot Spot Monitoring in Random Wound Electric Machine Coils”, in IEEE Sensors Journal, vol. 17, no. 10, pp. 3058-3067, 2017. doi: 10.1109/JSEN.2017.2691137
W.Tang, K.Brown, D.Flynn, H.Pellae, “Integrity Analysis Inspection and Lifecycle Prediction of Subsea Power Cables”, Prognostics and System Health Management Conference, Chongqing, 25-28 Oct, 2018
U Mupambireyi, A Crane, L Ran, P Mawby, “A Multiphase Machine and Converter Topology for Renewable Energy Generation”, in 2018 Energy Conversion Congress and Exposition (ECCE), Portland, OR, Sept, 2018.
B Hu, S Konaklieva, L Ran, N Kourra, M A Williams, W Lai, P Mawby, “Long Term Reliability of Power Modules with Low Amplitude Thermomechanical Stresses and Initial Defects”, in 2018 Energy Conversion Congress and Exposition (ECCE), Portland, OR, Sept, 2018.
Z. Lin, D. Cevasco, M. Collu, “Progress on the development of a holistic coupled model of dynamics for offshore wind farms, phase i: aero-hydro-servo-elastic model, with drive train model, for a single wind turbine”, in the 37th International Conference on Ocean, Offshore and Arctic Engineering, Madrid, Spain, 17-22 June, 2018.
B Hu, S Konaklieva, S Xu, J Ortiz-Gonzalez, L Ran, C Ng, P McKeever, O Alatise, “Condition Monitoring for Solder Layer Degradation in Multi-Device System Based on Neural Network”, in the 9th IET International Conference on Power Electronics, Machines, and Drives, April. 2018, Liverpool, UK.
R. Shah, R. Preece, M. Barnes, “Techno-economic evaluation of power electronics assisted system frequency regulation”, in the 9th IET International Conference on Power Electronics, Machines, and Drives, April. 2018, Liverpool, UK.
J. Carmona-Sanchez, O. Marjanovic, M. Barnes, W. Wang, “Comparison of DC Linear and Nonlinear Models for Multi-terminal VSC HVDC Networks”, in the 9th IET International Conference on Power Electronics, Machines, and Drives, April. 2018, Liverpool, UK.
A. Mohammed, N. Sarma, S. Djurović, “Fibre optic monitoring of induction machine frame strain as a diagnostic tool,” 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, 2017, pp. 1-7. doi: 10.1109/IEMDC.2017.8002208
A. Mohammed, S. Djurović, “FBG array sensor use for distributed internal thermal monitoring in low voltage random wound coils”, 2017 6th Mediterranean Conference on Embedded Computing (MECO), Bar, 2017, pp. 1-4. doi: 10.1109/MECO.2017.7977124